Product ID:BRIGHT SIDE DUSK GRAY, 4233
MSDS Date:09/22/1992
FSC:8010
NIIN:00N054412
MSDS Number: BVXPR

INTERNATIONAL PAINT CO. INC.

2270 MORRIS AVE
UNION, NJ 07083-5704
US

Emergency Phone: 800-223-0154

Info Phone: 800-223-0154

Cage: 26351

INTERNATIONAL PAINT INC

HOUSTON, TX 77091 US

Telephone: 800-589-1267/800-854-6813

Cage: 26351

SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC; (AROMATIC

CAS: 64742-95-6

RTECS: WF3400000

Fraction By Weight: 1-5%

OSHA PEL 100 PPM (MFR)

ACGIH TLV: 100 PPM (MFR)

7.0

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 30-35%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM

2.0

CAS: 64742-88-7

Fraction By Weight: 5-10%

OSHA PEL 100 PPM (MFR)

ACGIH TLV: 100 PPM (MFR)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:CAN CAUSE IRRITATION WITH
REDNESS, TEARING & BLURRED VISION. SKIN:IRRITATING. MAY RESULT IN
DERMATITIS. INHAL:IRRITATION OF RESP TRACT. HEADACHE & DIZZINESS &
UNCONSCIOUSNESS. INGEST:GASTRO -INTESTINAL IRRITATION, NAUSEA,
VOMITING, DIARRHEA. CHRONIC OVEREXPOS TO, & MISUSE OF, SOLVENTS
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:HAS BEEN LINKED TO PERMANENT BRAIN &
NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.

First Aid:EYES:FLUSH IMMED W/COPIOUS QTYS OF WATER FOR @ LEAST 15 MINS.
GET MED ATTN IMMED. SKIN:REMOVE CONTAMD CLTHG. WASH SKIN W/PLENTY
OF SOAP & WATER. LAUNDER CLOTHES BEFORE REUSE. INHAL:REMOVE TO
FRESH AIR . GIVE ARTF RESP IF NEEDED, GET MED ATTN. INGEST:CALL
PHYS IMMED TO DETERMINE WHETHER OR NOT TO INDUCE VOMITING.

Flash Point Method:PMCC
Flash Point:101F,38C
Lower Limits:1.0%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
SMOTHER FLAMES W/ONE OF ABOVE EXTING MEDIA. WATER MAY BE USED TO
COOL UNOPENED CNTNRS, BUT MUST NOT BE (SUPDAT)
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARK OR OPEN FLAME ARE PRESENT.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT. AVOID INHAL OF
VAPORS. VENTILATE AREA. CLEAN UP W/ABSORBENT MATLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN BUILDING DESIGNED & PROT FOR
STOR OF LIQ W/NFPA CLASS GIVEN BY OSHA CLASS IN ING SECTION 4.
Other Precautions:AVOID BRTHG DUST/CHIPS FROM SANDING/BLASTING SURFACES
COATED W/THIS PRODUCT.

Respiratory Protection:IN OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT, USE
NIOSH/MSHA APPRVD FILTER RESP TO REMOVE SOLID AIR-BORNE PARTICLES
OF OVERSPRAY DURING SPRAY APPLIC. IN RESTRICTED VENT AREAS, USE
NIOSH/MSHA APPRVD RESP I/A/W 29 CFR 1910.134 TO (SUPDAT)
Ventilation:PROVIDE SUFFICIENT VENT, IN VOL & PATTERN, TO KEEP TLV &LEL
OF HAZ INGREDS BELOW LIM & TO REMOVE DECOMP PROD (SUPDAT)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEM GOGG, AND FACE SHIELD.
Other Protective Equipment:WEAR APPROP IMPERVIOUS PROTECTIVE CLOTHING
TO PVNT SKIN CONTACT.
Work Hygienic Practices:REMOVE & WASH SOILED CLTHG BEFORE REUSE, WASH
HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC:USED AS EXTING MEDIA. TAKE CARE TO PVNT SPREAD OF
BURNING LIQ W/WATER. CLSD CNTNRS MAY EXPLODE WHEN EXPOS TO EXTREME
HEAT. RESP PROT:REMOVE COMBINATION OF PARTICULATES & VAP. VENT:DURI
NG WELDING/FLAME CUTTING ON SURF COATEDW/THIS PROD.

HCC:F4
Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.02
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NOT KNOWN
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:43

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:STORE AWAY FROM DIRECT HEAT, FLAME OR
SPARK.
Hazardous Decomposition Products:CO, CO*2, VARIOUS HYDROCARBON
FRAGMENTS.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.